2012年2月3日星期五

Show You What‘s in Cube U9GT2


Tablet pc is become one of the most famous digital products in 2001, recently china Tablet brand Cube published a new tablet which named Cube U9GT2, as an upgraded version of classical U9GT. Cube U9GT2 has 1G DDR3 RAM, 9.7 inch IPS screen, 10-point capacitive and 16GB store. Today we will disassembling this tablet, and you can see what's inside and its workmanship.

Cube U9GT2 Specifications
the most thin :4.99mm,660g in weight

9.7inch IPS screen ,1024×768 ten-pointed capacitive screen

1GB DDR3,16GBRK2918,1GHz

Back and front 2.0 mega pix camera

Android 2.3 os,Android 3.0 UI

GC800 3D GPU,1080p

4000mAh×2 battery

Ok, time to disassembling it open U9GT 2 in its side,you can find lots of slot in both side, and their workmanship is good and layouts also reasonable.


there are the inwards of Cube U9GT2,you can see there are two battery and PCB in it. Cube U9GT2 use the aluminium jacket in its back, that brings great touch experience for users and also make a good protect to this machine. The thinnest part of this tablet only 4.99mm that showing the great workmanship and design of factory.


There is a HD detail picture of Cube U9GT2,from this picture you can find that Cube U9GT2 use the modularized PCB,maybe it not so good as iPad, but still better than lots of other tablet made in China

here is the 2.0 mega pix camera in the back of Cube U9GT,they use a screw to fix it and a FPC to connect to the motherboard, the picture take by 2.0 mega pix camera is not clean as that take by 5.0 mega pix, but it's enough to satisfy the needs in ordinary
when i take the camera down from this tablet, i found that both back and front cameras were made in the same module! This is a smart design, and this is also why Cube U9GT2 was so thin!


Screen and motherboard use a FPC to connect each other, that make the signal transfer become stable!

Cube U9GT2 also use FPC to connect the side button to the motherboard,buttons are on the both side that suit both hand to control it, it's a humanized design!

Cube U9GT2 use a 3.5mm earphone connecting hole it support most of earphone .


This is CubeU9GT 2 output speaker,when you put on music with out earphone it still did a good job!

this is the motherboard of U9GT2's PCB

Red:RK2918 chip and 1GB DDR3 RAM1 covered by heating panel

Pink:16GB Flash store

Yellow:Screen drive IC

Orange:audio ICBlue:capacitive chip

Green:Realtek WIFI module and WIFI antenna

Right:4000mAh×2 battery


CUBE U9GT2 equip a 9.7inch IPS screen ,1024×768 pix resolution.


double 8GB FLASH brings 16GB store


DOESTEK DTC34LM85AL Screen video drivr


ALC5621 audio chip, SNR and THD+N both more than 92dB.

GOODIX GT801 is the capacitive chip,Cube U9GT2 has two of it it support 10-point capacitive touch


Realtek RIL8188CUS WIFI IC and its antenna

this is the heating panel of Cube U9GT2 ,let's open it and say the heart of the tablet.


Rockchip RK2918 Cortex-A8 1GHz CPU with Vivante GC800 GPU support 1080P Video, elpida 256MB×4 DDR3 RAM.

there are the whole elements of Cube U9GT2!Ok ,it's time to make them back


Thanks to the modularized elements it's easy to make it up!SDK2.0 appear again.

没有评论:

发表评论